Automatic Block Production Line, as a new type of environmental protection machinery and equipment, has been widely recognized and applied in the brick machine market. At present, it has become the main production equipment in the field of environmental protection building materials. Today, let's take you to understand the details of the concrete block forming machine production line before the use of the inspection work and the operation method during start-up operation.
Check the work before starting
- 1.Check for power problems before starting
Block Manufacturing Machine adopts a fully automatic production process, and electricity is one of the safety factors that cannot be ignored. In order to avoid some non-human factors equipment damage caused by circuit problems, to ensure production safety. Therefore, it is necessary to check whether each wire is intact before starting, and the bad ones should be replaced in time.
- 2.Check equipment wear
Concrete block equipment, especially equipment that has been put into production for more than one year, according to the statistical law of parts wear, carry out maintenance before the parts reach normal wear and aging, find and eliminate hidden dangers, avoid late damage of equipment, and ensure the normal operation of the assembly line.
- 3.Inspection of materials, debris and hard objects
Do not start the feeder equipment first to avoid overload, resulting in damage to equipment parts. Carefully check whether there are large substances in the production of materials, especially strong iron items, to avoid mold damage or other equipment is indirectly damaged.
- 4.Check, clean and maintain parts
Before starting, we should first check whether the screws of each part are loose, but also apply lubricating oil to each part, after shutting down, every corner of the equipment should be cleaned to prevent the trivial slag falling into the equipment to cause the abnormal operation of the equipment or aging acceleration.
- 5.Clean up irrelevant personnel at the scene
Install all the protective cover, floor cover and sealing net in advance, prohibit non-operators to approach or directly put their hands or debris into the sealing net, and clean up the personnel unrelated to the work before starting the machine, especially the motor direction is strictly prohibited to stand, to avoid safety accidents.
Normal operation method
- 1.The production line of concrete block forming machineadopts intelligent touch screen operation to stop and shut down. When stopping touch, do not press hard, let alone touch with harder materials.
- 2.In the maintenance, be sure to cut off the power first, and then repair. When the equipment is running, non-operators should stay away from the equipment, no one should touch the machinery, avoid personal accidents, and do not allow long-term no-load vibration operation.
- 3.In the technical maintenance process of the concrete block forming machine production line, different parts are equipped with detection points, and corresponding monitoring instruments need to be used to monitor, and various common tools and special tools must be complete and recorded. Different environmental conditions of each site, set up maintenance and repair required workbench, car groove, workshop and other facilities, to ensure that the technical testing and maintenance of various machinery can be smoothly carried out.
- 4.According to the information obtained in the process of testing and maintenance, formulate preventive measures and make necessary repairs to ensure that the equipment is in good technical condition.
5. brick mechanism after the end of the brick to remove the adhesion on the steel plate in time. The maintenance of the pallet schedule is very important, which directly affects the quality of the block products, and can be cleaned with the pallet grinding equipment, regularly turning the plate and oiling.
In summary, normal pre-boot detection of fully automatic block making machine, and operation and maintenance in accordance with the correct operation method can effectively guarantee the product quality of the brick machine production line, extend the service life of the concrete block forming machine production line, so as to save costs for enterprises and enhance their market competitiveness. As a supplier of machinery and block production lines for manufacturing various concrete products, Changsha Aichen has been committed to the research and development, manufacturing and sales of concrete block manufacturing machines. For more than 20 years, Aichen has always adhered to the principle of serving customers with sincerity and integrity. We offer comprehensive customer service, from consulting you to find the exact product that suits your needs, to quick delivery and product setup help, to any training, other customer support or on-site help you may need when working with your new concrete product machine. We are happy to help you with your concrete machinery needs, please contact us for more information.
