Block forming machine can produce more than 10 kinds of different specifications of free brick such as hollow block, porous brick, standard brick and so on. Using pneumatic drive control material, molding, export continuous completion, safe and stable operation, easy to maintain. 26 bricks are marked every 25 seconds, and 3,744 bricks are produced per hour. 12 porous bricks are produced every 25 seconds, and 1,728 bricks are produced per hour. Four standard blocks are produced every 25 seconds, producing 576 blocks per hour. The core components are seiko manufactured and the fatigue resistant design is adopted to extend the service life of the main engine. The exciting force is strong, and the strength can reach 2.5 ~ 15MPa under ordinary mixing conditions. The double rod guide mode and the excellent ultra-long guide sleeve ensure the accurate operation of the indenter and the mold. The base and key parts are cast as a whole. The outer frame is made of thick wall super section steel and special welding technology. Use or mold change specifications, saving time and labor in mechanical use, reasonable design. Compact structure, safe and reliable, reasonable use of a set of transmission mechanism, complete a variety of process actions, simplify the mechanical structure, easy to maintain. The product quality error is less than 1%, the strength error is 0.5%. Pressure up and down, strong vibration, especially suitable for the production of high strength blocks, after forming can be stacked (3-5 layers). The slag content of the block forming machine is large, and the compressive strength of the product is above MU10.0. Different molds can be used to produce various specifications and shapes of wall blocks.
Equipment characteristics
1. One machine can produce more than 10 kinds of different specifications of free bricks such as hollow block, porous brick, standard brick, etc. Safe and stable operation, easy to maintain.
2.Marking 26 bricks every 25 seconds, 3744 bricks per hour; 12 porous bricks are produced every 25 seconds, and 1,728 bricks are produced per hour. Four standard blocks are produced every 25 seconds, producing 576 blocks per hour.
3.Core components seiko manufacturing, using anti-fatigue design, extend the service life of the main engine.
4.Strong exciting force, the strength can reach 2.5 ~ 15MPa under ordinary mixing conditions.
5.Double rod guide mode and excellent ultra-long guide sleeve ensure the precise operation of the indenter and mold. The base and key parts are cast as a whole. The outer frame is made of thick wall super section steel and special welding technology.
Technical characteristics
hollow block making machine The whole structure is compact, the equipment is reasonable, and the rotating part adopts mechanized device, which is accurate and reliable. Reduce labor intensity and improve production efficiency. Up and down pressure, directional vibration, variable frequency brake, to achieve high density, high strength molding effect. A multi-purpose machine, with different molds can produce different shapes, different specifications of the block products. The mechanical structure of each part is easy to observe, simple operation, convenient maintenance, and not easy to malfunction to ensure normal production operation.
1.Block machine for fixed, table vibration, mechanical demoulding, the model design is advanced and reasonable, wide range of application, using reducer, brake magnet bend arm around demoulding.
2.The use of 4 columns, accurate positioning, mold balance and stability, improve the density of the block, small rough edge of the block, good appearance.
3.The mold is easy to replace, simple and easy to maintain.
The above describes the large and medium-sized automatic block forming machine equipment, in addition to small block forming machine, in general, this equipment is defined according to the daily output size, the daily standard brick in about 10,000 equipment, are called small, because the overall design of this equipment is relatively simple, so the user is more convenient to operate. Large block forming machines generally use hydraulic and vibration forming, and small block forming machines generally use vibration forming, but the quality of the products produced by small equipment is not worse than that of large equipment.
Technological advantage
1.Compared with the traditional clay brick machine, the raw material can be selected industrial waste slag: coal ash, coal gangue, slag, smelting slag and various tail slag as the main raw material, more environmentally friendly, more energy saving, waste recycling.
2.the block forming machine adopts three bars up and down pressure molding, after forming can be stacked immediately, without a supporting brick plate, is the latest model of domestic block brick.
3.The standard brick produced by the block forming machine has low cost and high profit. Taking into account all the necessary costs, the cost of each brick is 9 cents, and the market price is 2-3 times that.
4.block forming machine body is made of high-precision, high-strength castings and special welding technology and materials, good rigidity, vibration resistance, long life.
5.The Automatic Block Machine adopts hydraulic pressure forming of table mold and vibration, and adopts round-trip guide feeding device. The forming cycle is short, the production efficiency is high, the quality and strength of the block are high, and the size is accurate.
6.The block forming machine adopts mechanical, electrical and hydraulic integration technology, so that every cycle process of equipment operation is consistent, so the molding output is high and stable, and the scrap rate is low.
7.A multi-purpose block forming machine, by replacing the mold can produce different specifications of porous brick, hollow block, curb, road brick and planting grass tree brick, lattice brick and other cement products.
8.According to the production needs to prepare the program, to achieve manual, semi-automatic, fully automatic operation.
